Climate-Triggered Drought as Causes for Different Degradation Types of Natural Forests: A Multitemporal Remote Sensing Analysis in NE Iran

Climate-triggered forest disturbances are increasing either by drought or by other climate extremes. Droughts can change the structure and function of forests in long-term or cause large-scale disturbances such as tree mortality, forest fires and insect outbreaks in short-term. Traditional approaches such as dendroclimatological surveys could retrieve the long-term responses of forest trees to drought conditions; however, they are restricted to individual trees or local forest stands. Therefore, multitemporal satellite-based approaches are progressing for holistic assessment of climate-induced forest responses from regional to global scales. However, little information exists on the efficiency of satellite data for analyzing the effects of droughts in different forest biomes and further studies on the analysis of approaches and large-scale disturbances of droughts are required. This research was accomplished for assessing satellite-derived physiological responses of the Caspian Hyrcanian broadleaves forests to climate-triggered droughts from regional to large scales in northeast Iran. The 16-day physiological anomalies of rangelands and forests were analysed using MODIS-derived indices concerning water content deficit and greenness loss, and their variations were spatially assessed with monthly and inter-seasonal precipitation anomalies from 2000 to 2016. Specifically, dimensions of forest droughts were evaluated in relations with the dimensions of meteorological and hydrological droughts. Large-scale effects of droughts were explored in terms of tree mortality, insect outbreaks, and forest fires using field observations, multitemporal Landsat and TerraClimate data. Various approaches were evaluated to explore forest responses to climate hazards such as traditional regression models, spatial autocorrelations, spatial regression models, and panel data models. Key findings revealed that rangelands’ anomalies did show positive responses to monthly and inter-seasonal precipitation anomalies. However, forests’ droughts were highly associated with increases in temperatures and evapotranspiration and were slightly associated with the decreases in precipitation and surface water level. The hazard intensity of droughts has affected the water content of forests higher than their greenness properties. The stages of moderate to extreme dieback of trees were significantly associated with the hazard intensity of the deficit of forests’ water content. However, the stage of severe defoliation was only associated with the hazard intensity of forests’ greenness loss. Climate hazards significantly triggered insect outbreaks and forest fires. Although maximum temperatures, precipitation deficit, availability of soil moisture and forest fires of the previous year could significantly trigger insect outbreaks, the maximum temperatures were the only significant triggers of forest fires from 2010‒2017. In addition to climate factors, environmental and anthropogenic factors could control fire severity during a dry season. The overall evaluation indicated the evidence of spatial associations between satellite-derived forest disturbances and climate hazards. Future studies are required to apply the approaches that could handle big-data, use the satellite data that have finer wavelengths for large-scale mapping of forest disturbances, and discriminate climate-induced forest disturbances from those that induced by other biotic and abiotic agents.Klimagbedingte Waldstörungen nehmen entweder durch Dürre oder durch andere Klimaextreme zu. Dürren können langfristig die Struktur und Funktion der Wälder verändern oder kurzfristig große Störungen wie Baumsterben, Waldbrände und Insektenausbrüche verursachen. Traditionelle Ansätze wie dendroklimatologische Untersuchungen könnten die langfristigen Reaktionen von Waldbäumen auf Dürrebedingungen aufzeigen, sie sind aber auf einzelne Bäume oder lokale Waldbestände beschränkt. Daher werden multitemporale satellitengestützte Ansätze zur ganzheitlichen Bewertung von klimabedingten Waldreaktionen auf regionaler bis globaler Ebene weiterentwickelt. Es gibt jedoch nur wenige Informationen über die Effizienz von Satellitendaten zur Analyse der Auswirkungen von Dürren in verschiedenen Waldbiotopen. Daher sind weitere Studien zur Analyse von Ansätzen und großräumigen Störungen von Dürren erforderlich. Diese Forschung wurde durchgeführt, um die aus Satellitendaten gewonnenen physiologischen Reaktionen der im Nordosten Irans gelegenen kaspischen hyrkanischen Laubwälder auf klimabedingte Dürren auf lokaler und regionaler Ebene zu bewerten. Auf der Grundlage der aus MODIS-Daten abgeleiteten Indizes wurden die 16-tägigen physiologischen Anomalien von Weideland und Wäldern in Bezug auf Wassergehaltsdefizit und Grünverlust analysiert und ihre Variationen räumlich mit monatlichen und intersaisonalen Niederschlagsanomalien von 2000 bis 2016 bewertet. Insbesondere wurden die Dimensionen der Walddürre in Verbindung mit den Dimensionen der meteorologischen und hydrologischen Dürre bewertet. Großräumige Auswirkungen von Dürren wurden in Bezug auf Baumsterblichkeit, Insektenausbrüche und Waldbrände mit Hilfe von Feldbeobachtungen, multitemporalen Landsat- und TerraClimate Daten untersucht. Verschiedene Ansätze wurden ausgewertet, um Waldreaktionen auf Klimagefahren wie traditionelle Regressionsmodelle, räumliche Autokorrelationen, räumliche Regressionsmodelle und Paneldatenmodelle zu untersuchen. Die wichtigsten Ergebnisse zeigten, dass die Anomalien von Weideland positive Reaktionen auf monatliche und intersaisonale Niederschlagsanomalien aufweisen. Die Dürren in den Wäldern waren jedoch in hohem Maße mit Temperaturerhöhungen und Evapotranspiration verbunden und standen in geringem Zusammenhang mit dem Rückgang von Niederschlägen und des Oberflächenwasserspiegels. Die Gefährdungsintensität von Dürren hat den Wassergehalt von Wäldern stärker beeinflusst als die Eigenschaften ihres Blattgrüns. Die Stufen mittlerer bis extremer Baumsterblichkeit waren signifikant mit der Gefährdungsintensität des Defizits des Wassergehalts der Wälder verbunden. Das Ausmaß der starken Entlaubung hing jedoch nur mit der Gefährdungsintensität des Grünverlustes der Wälder zusammen. Die Klimagefahren haben zu deutlichen Insektenausbrüchen und Waldbränden geführt. Obwohl Maximaltemperaturen, Niederschlagsdefizite, fehlende Bodenfeuchte und Waldbrände des Vorjahres deutlich Insektenausbrüche auslösen konnten, waren die Maximaltemperaturen die einzigen signifikanten Auslöser von Waldbränden von 2010 bis 2017. Neben den Klimafaktoren können auch umweltbedingte und anthropogene Faktoren den Schweregrad eines Brandes während einer Trockenzeit beeinflussen. Die Gesamtbewertung zeigt Hinweise auf räumliche Zusammenhänge zwischen aus Satellitendaten abgeleiteten Waldstörungen und Klimagefahren. Weitere Untersuchungen sind erforderlich, um Ansätze anzuwenden, die mit großen Datenmengen umgehen können, die Satellitendaten in einer hohen spektralen Auflösung für die großmaßstäbige Kartierung von Waldstörungen verwenden und die klimabedingte Waldstörungen von denen zu unterscheiden, die durch andere biotische und abiotische Faktoren verursacht werden

Logging Trail Segmentation via a Novel U-Net Convolutional Neural Network and High-Density Laser Scanning Data

Logging trails are one of the main components of modern forestry. However, spotting the accurate locations of old logging trails through common approaches is challenging and time consuming. This study was established to develop an approach, using cutting-edge deep-learning convolutional neural networks and high-density laser scanning data, to detect logging trails in different stages of commercial thinning, in Southern Finland. We constructed a U-Net architecture, consisting of encoder and decoder paths with several convolutional layers, pooling and non-linear operations. The canopy height model (CHM), digital surface model (DSM), and digital elevation models (DEMs) were derived from the laser scanning data and were used as image datasets for training the model. The labeled dataset for the logging trails was generated from different references as well. Three forest areas were selected to test the efficiency of the algorithm that was developed for detecting logging trails. We designed 21 routes, including 390 samples of the logging trails and non-logging trails, covering all logging trails inside the stands. The results indicated that the trained U-Net using DSM (k = 0.846 and IoU = 0.867) shows superior performance over the trained model using CHM (k = 0.734 and IoU = 0.782), DEMavg (k = 0.542 and IoU = 0.667), and DEMmin (k = 0.136 and IoU = 0.155) in distinguishing logging trails from non-logging trails. Although the efficiency of the developed approach in young and mature stands that had undergone the commercial thinning is approximately perfect, it needs to be improved in old stands that have not received the second or third commercial thinning

Logging Trail Segmentation via a Novel U-Net Convolutional Neural Network and High-Density Laser Scanning Data

Logging trails are one of the main components of modern forestry. However, spotting the accurate locations of old logging trails through common approaches is challenging and time consuming. This study was established to develop an approach, using cutting-edge deep-learning convolutional neural networks and high-density laser scanning data, to detect logging trails in different stages of commercial thinning, in Southern Finland. We constructed a U-Net architecture, consisting of encoder and decoder paths with several convolutional layers, pooling and non-linear operations. The canopy height model (CHM), digital surface model (DSM), and digital elevation models (DEMs) were derived from the laser scanning data and were used as image datasets for training the model. The labeled dataset for the logging trails was generated from different references as well. Three forest areas were selected to test the efficiency of the algorithm that was developed for detecting logging trails. We designed 21 routes, including 390 samples of the logging trails and non-logging trails, covering all logging trails inside the stands. The results indicated that the trained U-Net using DSM (k = 0.846 and IoU = 0.867) shows superior performance over the trained model using CHM (k = 0.734 and IoU = 0.782), DEMavg (k = 0.542 and IoU = 0.667), and DEMmin (k = 0.136 and IoU = 0.155) in distinguishing logging trails from non-logging trails. Although the efficiency of the developed approach in young and mature stands that had undergone the commercial thinning is approximately perfect, it needs to be improved in old stands that have not received the second or third commercial thinning

High-Resolution Semantic Segmentation of Woodland Fires Using Residual Attention UNet and Time Series of Sentinel-2

Southern Africa experiences a great number of wildfires, but the dependence on low-resolution products to detect and quantify fires means both that there is a time lag and that many small fire events are never identified. This is particularly relevant in miombo woodlands, where fires are frequent and predominantly small. We developed a cutting-edge deep-learning-based approach that uses freely available Sentinel-2 data for near-real-time, high-resolution fire detection in Mozambique. The importance of Sentinel-2 main bands and their derivatives was evaluated using TreeNet, and the top five variables were selected to create three training datasets. We designed a UNet architecture, including contraction and expansion paths and a bridge between them with several layers and functions. We then added attention gate units (AUNet) and residual blocks and attention gate units (RAUNet) to the UNet architecture. We trained the three models with the three datasets. The efficiency of all three models was high (intersection over union (IoU) > 0.85) and increased with more variables. This is the first time an RAUNet architecture has been used to detect fire events, and it performed better than the UNet and AUNet models-especially for detecting small fires. The RAUNet model with five variables had IoU = 0.9238 and overall accuracy = 0.985. We suggest that others test the RAUNet model with large datasets from different regions and other satellites so that it may be applied more broadly to improve the detection of wildfires.Peer reviewe

Anomalous Origin of the Left Coronary Artery from the Right Sinus of Valsalva and Sever Mitral Stenosis

Congenital coronary anomalies are presented in approximately1% of patient referred for cardiac catheterization. Among the congenital coronary anomalies, a separated anomalous origin of all the coronary arteries from the right sinus of valsalva is very uncommon. We report a rare occurance of simultaneous occurence of mitral stenosis with ectopic origin of left main stem coronary artery from right sinus of Valsalva

Nanotechnology markets in global competition: a review

Nowadays, nanotechnology is as a main way of in international competitiveness that is due to science and technology. Hence, nanotechnology is known as a new industry or science in the global market competition topics. Also, developed or developing countries would trend to acquire portions for future markets through the investment in nanotechnology (R&D) because of profitable products and services in the future which are consistency environmentally and green. The products or services of nanocan be supplied in different markets e.g. energy, industry, medicine, and so on. Moreover, each of them depends upon innovation in producing new features or materials for the future that can be considered as important factors for different solutions for problems of life and humanity. Most of big companies pursue nanotechnology business in the global market from different products and services through the intensive competitions especially energy sector in the future. Although it can be accounted as new business in the future, there are some weakness of the firms in competitiveness i.e. weakness in strategies, capabilities, assets and knowledge. Hence, the aim of this study is to understand variety of issues in the literature of nanotechnology and strategies from managerial views

Effects of competitive advantage on companies superiority in the global market

Strategy is an organization's action plan to achieve the mission. Each strategy provides an opportunity for operations managers to achieve Competitive Advantage (CA). CA implies the creation of a system that has a unique advantage over competitors. Improving researches, economic prosperity and quality of products can be considered as CA abilities through each company. CA is used for acquiring superior position in the world from different angles of science, economics and technologies. Generally, CA considered as strategic management or paradigm management. Hence, the performances of organizations or manufactures are pertained to the relevant theories from CA that is crucial points to compete and take advantage from the new technology. Since competitiveness is accounted as a fundamental role in industrial activities for achieving goals. Moreover, successfully growing a business is often dependent upon a strong competitive edge. The aim of this study is to collect information from the literature to seek the best strategy as CA for reducing cost, differentiating company and increasing efficiency

Evaluation of Forest Features Determining GNSS Positioning Accuracy of a Novel Low-Cost, Mobile RTK System Using LiDAR and TreeNet

Accurate positioning is one of the main components and challenges for precision forestry. This study was established to test the feasibility of a low-cost GNSS receiver, u-blox ZED-F9P, in movable RTK mode with features that determine its positioning accuracy following logging trails in the forest environment. The accuracy of the low-cost receiver was controlled via a geodetic-grade receiver and high-density LiDAR data. The features of nearby logging trails were extracted from the LiDAR data in three main categories: tree characteristics; ground-surface conditions; and crown-surface conditions. An object-based TreeNet approach was used to explore the influential features of the receiver’s positioning accuracy. The results of the TreeNet model indicated that tree height, ground elevation, aspect, canopy-surface elevation, and tree density were the top influencing features. The partial dependence plots showed that tree height above 14 m, ground elevation above 134 m, western direction, canopy-surface elevation above 138 m, and tree density above 30% significantly increased positioning errors by the low-cost receiver over southern Finland. Overall, the low-cost receiver showed high performance in acquiring reliable and consistent positions, when integrated with LiDAR data. The system has a strong potential for navigating machinery in the pathway of precision harvesting in commercial forests

Evaluation of Forest Features Determining GNSS Positioning Accuracy of a Novel Low-Cost, Mobile RTK System Using LiDAR and TreeNet

Accurate positioning is one of the main components and challenges for precision forestry. This study was established to test the feasibility of a low-cost GNSS receiver, u-blox ZED-F9P, in movable RTK mode with features that determine its positioning accuracy following logging trails in the forest environment. The accuracy of the low-cost receiver was controlled via a geodetic-grade receiver and high-density LiDAR data. The features of nearby logging trails were extracted from the LiDAR data in three main categories: tree characteristics; ground-surface conditions; and crown-surface conditions. An object-based TreeNet approach was used to explore the influential features of the receiver’s positioning accuracy. The results of the TreeNet model indicated that tree height, ground elevation, aspect, canopy-surface elevation, and tree density were the top influencing features. The partial dependence plots showed that tree height above 14 m, ground elevation above 134 m, western direction, canopy-surface elevation above 138 m, and tree density above 30% significantly increased positioning errors by the low-cost receiver over southern Finland. Overall, the low-cost receiver showed high performance in acquiring reliable and consistent positions, when integrated with LiDAR data. The system has a strong potential for navigating machinery in the pathway of precision harvesting in commercial forests